Jeans by Measurement is Way to get your Perfect fit jeans

Garment measurement is the easiest and most commonly used for providing measurement. Our experience with other methods of measuring has never been as accurate and satisfying as measuring a good fitting pair of jeans and make minor adjustments for better fit.

If your current jeans is of stretch material, DO NOT USE THAT JEANS FOR MEASUREMENTS, Stretch Jeans are not to be used for garment measurements,
Use 100% Cotton Rigid Jeans to take measurements, and make sure you IRON them properly before taking measurements to avoid any uneven surface which may affect the measurements. 

Helpful tips for perfect measurement.

  1. Take a loose measuring tape either in inches or cm (Do not use Carpenters Tape).
  2. Measure using the beginning of the tape and keep it firm do not tighten it.
  3. Measure your jeans laying flat on a table – close the zip and button.
  4. Take a piece of paper and pen to note down the measurement.
  5. You can modify the measurements for a better fit.
  6. Please do not provide the label size of the jeans for any of the measurements.

Once you place the order we will check all your measurments and see if they are in proportion before making your jeans.

How to Measure your Jeans?

1. Outseam

From Waist line to all the way to bottom on pants, measure without tightening the tape


2. Inseam

Crotch Intersection to all the way to bottom on pants, measure without tightening the tape follow the stitch firmly


3. Front Crotch

From Crotch Intersection to all the way to top till button on pants upto the edge, measure without tightening the tape follow the stitch and fly firmly


4. Back Rise

From Crotch Intersection to all the way to the back till edge on waist line , measure without tightening the tape follow the stitch and fly firmly


5. Waist Line

Lay Flat your jeans like below picture (Make Jeans flat across with shifting the alignment with button closed) 
While measuring position the tape measure very close to the jeans without tightening.  and double the measurements


6. Hips

From Side of Out Seam from widest portion of jeans to all the way till edge on another side, maintain the angle as shown in video, measure without tightening the tape follow the stitch and fly firmly and double the measurements


7. Thigh

From Side of Out Seam from widest portion of leg to all the way till edge on another side of leg, maintain the fix angle as shown in video, measure without tightening the tape follow the stitch and fly firmly and double the measurements


8. Knee

From Side of Out Seam from the knee portion of leg (Mark it half way by folding it as shown in video) to all the way till edge on another side of leg, maintain the fix angle as shown in video, measure without tightening the tape follow the stitch and fly firmly and double the measurements


9. Bottom (Leg Opening)

From Side of Out Seam from the Bottom (Leg opening) portion of leg to all the way till edge on another side of leg, as shown in video, measure without tightening the tape follow the stitch and fly firmly and double the measurements